HOW TO APPLY GARAGE FLOOR EPOXY
Looking to strengthen and add some beauty to your garage floor? You have the epoxy as a nice option to utilize. But just what is epoxy? What are some of its possible benefits? And how may it be applied? Well, we have prepared concrete resurfacing guide for New York City to answer these and many more relevant questions. Read on to find out more…
HOW TO APPLY GARAGE FLOOR EPOXY
Tools and Materials Required
You will first and foremost have to garner these tools and materials:
- Paint roller
- Power floor scrubber
- Rubber boots
- Rubber gloves
- Safety glasses
- Wet/Dry Shop Vacuum
- Epoxy floor paint
Follow these steps now to apply the garage floor epoxy:
Step I: Assess your garage floor
Start out by assessing your garage floor. This simply means skimming your floor to find out where there be any scratches, cracks, inconsistencies, and other forms of damages that may impede the smooth application of the epoxy. It is at this stage that you also level the floor if it is slanted or the need for concrete resurfacing.
Step II: Prep your Floor
Upon assessing your floor, you may have noted some of the issues we have highlighted above. This is the time to deal with them. Fill the cracks, level the surface of the epoxy flooring, and remove any old epoxy if at all it exists. Finish off by cleaning the surface to rid the same of all dirt and other impurities.
Step III: Test the concrete for moisture
You should now assess where there be any notable signs of moisture infestation of the floor. Moisture has a way of weakening the strength of the epoxy not to mention diminishing the life expectancy of the floor altogether. Make use of the efflorescence to find out whether this exists.
Step IV: Clean the garage floor using a vacuum cleaner
Before you commence applying the epoxy, you have to vacuum-clean the floor to eliminate any trace of dust or dirt particles that may remain. Remember, epoxy is very sticky. It is hence likely to capture any debris that falls along its path. Pay particular attention to the greasy residues or oils as they water down the strength of the epoxy.
Step V: Carry out some floor profiling
Profiling the garage floor is the process of exposing the pores that may exist on the concretes to let the epoxy to flow smoothly and make a stronger bond. By profiling, you get to know also how to channel the flow of the epoxy without necessarily wasting too much of the same.
Step VI: Prep the epoxy
At this stage, you should prepare the epoxy prior to applying the same onto the floor. Mix the various components in the correct components and stir thoroughly by the use of a stirring bit or a drill. Ensure that at the tail end of it all, you obtain a completely uniform blend.
Step VII: Apply the epoxy carefully and diligently
Get down to business now. Apply the epoxy carefully and diligently. Brush it around the perimeter of the floor wherein you desire to impact. Then, proceed to the center of the floor. Make several passes for a more uniform and thorough stick. Add some non-skid granules to aid with friction and stability. Leave to dry for some time and carry out concrete polishing.
Most epoxies have a distinctively sharp smell. You should never forget to put on the face masks to spare you of the attendant respiratory tract infections. Plus, it also plays to make several practices to be able to gain the expertise you need to arrive at better outcomes.